A
A-4 Troubleshooting
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Setup > Service
Setup > PServer Setup >
Bindery Setup)
No NetWare print
server found.
No print server was found when Fiery queried the file
server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle Fiery print jobs
(see page 2-10).
Any Bindery Setup screen Novell error code, followed by
a message.
Novell NetWare has reported an error. Command Work-
Station reports the error number and displays a
brief message.
For the most common errors (listed in the following table),
a screen is displayed that allows you to retry the action that
evoked the error, such as adding a server. If that is
not possible, you are prompted to notify the Novell admin-
istrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for fur-
ther explanation of Novell error codes.
After this Setup screen This message Means
To Next Page
Loading...
Need help?
General
