Oki ColorPainter M-64S - Page 31

31
Printing on reflective sheeting
21
ENTER REMAIN MEDIA
2
07: XXX.X
g
YYY.Ym
Set the amount of remaining media.
Set the amount of remaining media and press the OK
button.
To register the amount of remaining media
The menu used to set the amount of remaining
media is displayed only when ON is set for REMAIN
MEDIA MONIT in the media preset menu.
See Procedure to monitor remaining media
on
page 31
for details on how to congure
remaining media monitoring.
See
page 53
in the IP-6620 Color Inkjet
Printer User’s Guide for details on how to congure
remaining media monitoring.
22
CHECKING MD EDGES
PLEASE WAIT
The media loading operation starts
automatically.
- When the operation completes successfully, the printer
returns to the online or offline state.
- If the operation fails, an error message is displayed.
Media position error
INCORRECT MEDIA POS
RELOAD MEDIA
Media mismatch error (when the reective sheet
mode is on)
RFL SHEET MODE ON
CHECK LOADED MEDIA
Media mismatch error (when the reective sheet
mode is o)
RFL SHEET MODE OFF
CHECK LOADED MEDIA
The solution to recover the error diers depending on
the displayed message.
Refer to When an error message is displayed on
page 74 for details on how to recover the error.

After the media loading operation completes successfully (in online state), the panel display is as follows.
D: Indicates that the Detect Media setting is set to o.
* The Detect Media setting is automatically set to off when RFLTIV has been
selected as the media type in step 20.
PRINTER READY
07: RFLTIV/1219mm D
Before printing
Printing on
reective sheeting
Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix