Oki ColorPainter M-64S - Page 32

32
Printing on reflective sheeting

You can recover the media mismatch error by pressing any button. The following warning is displayed if no action
is carried out (the printer emits also a warning beep every minute).
CHECK REFLECTIVE
SHEET MODE STATUS
Printing can be performed with the error message displayed, but follow the procedure below if you want to stop
the warning beep.
1
PRINTER READY
01: PAPER / 1626mm
Press the MENU button.
2
MENU
2
INFORMATION
Press the Down button to select SETTING.
3
MENU
2
SETTING
Press the OK button.
4
>SETTING
2
SYSTEM
Press the OK button.
5
>>SYSTEM
2
SUBSCRIPTION CODE
Press the Down button to select WARNING
SOUND.
6
>>SYSTEM
2
WARNING SOUND
Press the OK button.
7
>>>WARNING SOUND
2
PH UNCAPPED
,
Press the Up or Down button to select MEDIA
MISMATCH.
8
>>>WARNING SOUND
2
MEDIA MISMATCH
Press the OK button.