Oki MC160MFP - Page 82

44292401TH Rev.1
81 /
Oki Data CONFIDENTIAL
MAINTENANCE
7.3.11 DC power supply (DCPU)
1. Remove the printer control board.
See P.78
2. Remove the FAX control board.
See P.80
3. Remove the MFP board.
See P.79
4. Remove the screw [1].
5. Disconnect two connectors [2] (Red
and white), remove the harness from
two wire saddles [3].
6. Remove two screws [1], and remove
the main switch [2].
7. Disconnect two connectors (black)
[1].
8. Disconnect the connector [2].
A0HFF2C516DA
[1]
[3]
[2]
A034F2C525DA
[1]
[2]
A034F2C526DA
[2]
[1]
9. Remove two screws [1], and remove
the plate [2].
10. Remove the harness [1], and remove
the harness guide [2].
11. Remove the screw [1], and remove
the harness band [2].
12. Remove five screws [1] to pull out
the DC power unit assy [2].
A0HFF2C517DA
[1]
[2]
A034F2C085DA
[1]
[2]
A034F2C086DA
[1]
[2]
A034F2C087DA
[1]
[2]
6.3.11 DC power supply (DCPU)