147 Using the Scanner
Selecting the Scan Quality Setting
The resolution, scan mode and density appropriate for the scanned image can
be selected.
Selecting the Resolution
1 In the main screen (Scan mode), press the up or down arrow key to select the
current scan quality setting, and then press the Enter key.
2 Press the up or down arrow key to select RESOLUTION, and then press the
Enter key.
3 Press the up or down arrow key to select 150x150dpi or 300x300dpi, and
then press the Enter key.
The main screen (Scan mode) appears again.
Selecting the Scan Mode
1 In the main screen (Scan mode), press the up or down arrow key to select the
current scan quality setting, and then press the Enter key.
2 Press the up or down arrow key to select MODE, and then press the Enter
key.
3 Press the up or down arrow key to select MIX, TEXT or PHOTO, and then
press the Enter key.
The main screen (Scan mode) appears again.
Selecting the Scan Density
1 In the main screen (Scan mode), press the up or down arrow key to select the
current scan quality setting, and then press the Enter key.
2 Press the up or down arrow key to select DENSITY, and then press the Enter
key.
3 Press the up or down arrow key to select the desired scan density, and then
press the Enter key.
As the indicator is moved to right, the density becomes darker.
To Next Page
Loading...
Need help?
General
