95 Media Handling
Media Storage
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause missfeeding.
If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place on a level surface.
Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust
Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality.
To Next Page
Loading...
