44 Control Panel and Configuration Menu
TONER LOW Setting ON / OFF
Select whether or not a warning message
appears when the toner is nearly empty.
AUTO CONTINUE Setting ON / OFF
Select whether or not printing continues when
a size error occurs during printing.
IMAGE REFRESH Setting ON / OFF
Use when thin white horizontal lines appear at
intervals on images. The IMAGE REFRESH
function consumes toner.
DUPLEX SPEED Setting AUTOMATIC / SPEED / QUAL-
ITY
Select the print speed for double-sided print-
ing.
If AUTOMATIC is selected, the print speed is
automatically selected.
If SPEED is selected, the print speed has pri-
ority; however, the print quality may decrease.
If QUALITY is selected, the print quality has
priority; therefore, the print speed will
decrease while the print quality may increase.
CALIBRATION Setting ON / OFF
Select whether or not to perform image stabili-
zation. If ON is selected, image stabilization is
started.
To Next Page
Loading...
Need help?
General
