55 Control Panel and Configuration Menu
SNMP Setting DISABLE / ENABLE
Select whether or not to enable SNMP.
SPEED/DUPLEX Setting AUTO / 10BASE-T FULL /
10BASE-T HALF /
100BASE-TX FULL /
100BASE-TX HALF
Specifies the transmission speed for the
network and the transmission method for
bi-directional transmission.
E-MAIL
SETTING
SMTP Setting DISABLE / ENABLE
Select whether to enable or disable
e-mail transmission operations for this
machine.
SENDER NAME Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is “OKI-MC160n”.
E-MAIL ADDRESS Specify the E-mail address (up to 64
characters) of the E-mail sender used for
network scanning.
The default setting is blank.
DEFAULT SUBJECT Specify the subject (up to 20 characters)
of the E-mail message used for network
scanning.
The default setting is “From
OKI-MC160n”.
SMTP SERVER
ADDR.
Specify the IP address or host name (up
to 64 characters) for the SMTP server.
The default setting is “0.0.0.0”.
SMTP PORT NO. Setting 1 to 65535 (Default: 25)
Specify the port number communicating
with the SMTP server.
To Next Page
Loading...
Need help?
General
