Oki MC160MFP User Manual

57 Control Panel and Configuration Menu
SMTP
AUTH.
DIS-
ABLE/
ENABLE
Setting DISABLE / ENABLE
Select whether or not to enable SMTP
authentication.
SMTP
USER-
NAME
Specify the user name (up to 63 charac-
ters) used for SMTP authentication.
The default setting is blank.
SMTP
PASS-
WORD
Specify the password (up to 15 charac-
ters) used for SMTP authentication.
The default setting is blank.
LDAP SET-
TING
DISABLE/ENABLE Setting DISABLE / ENABLE
Select whether or not to enable the LDAP
function.
LDAP SERVER
ADDR.
Specify the address (up to 64 characters)
of the LDAP server.
The default setting is “0.0.0.0”.
LDAP PORT NO. Setting 1 to 65535 (Default: 389)
Specify the port number of the LDAP
server.
SSL SETTING Setting DISABLE / ENABLE
Select whether or not to enable SSL.
SEARCH BASE Specify the search starting point (up to 64
characters) in a hierarchical structure
arranged on the LDAP server.
The default setting is blank.
ATTRIBUTE The conditions for searches can be speci-
fied as a name or e-mail address (up to
32 characters).
The default setting is “cn”.
SEARCH METHOD Setting BEGIN / CONTAIN / END
The specified characters can be searched
for at the beginning, within or at the end.
LDAP TIMEOUT Setting 5 to 300 sec (Default: 60
sec)
Specify the maximum wait time during a
search.

Oki MC160MFP Specifications

General

Brand	Oki
Model	MC160MFP
Category	All in One Printer
Language	English