71 Control Panel and Configuration Menu
RX MODE Setting AUTO RX / MANUAL RX
Select whether the reception mode is set to auto-
matic reception or manual reception.
AUTO RX: Automatically begins receiving the fax
after the set number of rings.
MANUAL RX: Does not automatically receive the fax.
Reception begins after making a connection by pick-
ing up the telephone receiver or pressing the On
hook key, then pressing the Start key.
FORWARD Setting OFF / ON / ON(PRINT)
Select whether or not to forward received fax docu-
ments.
OFF: Select this setting to not forward the document.
ON: Select this setting to forward the received fax
document to the specified fax number or e-mail
address.
ON(PRINT): Select this setting to forward the
received fax document to the specified fax number or
e-mail address at the same time that the machine
prints it.
FOOTER Setting OFF / ON
Select whether or not the reception information (date
received, number of pages, etc.) is printed at the bot-
tom of each received document.
SELECT TRAY Setting TRAY1 / TRAY2
Select which paper tray can be used to supply paper
when printing received documents or transmission
reports.
" If an optional lower feeder unit is not installed,
this setting is not available.
To Next Page
Loading...
Need help?
General
