Oki MC361 User Manual

40
printer’s Troubleshooting Print-Quality Problems pages or a specific print-quality
troubleshooting procedure for more information.
Imaging Unit
 Streaks in Process Direction (in the direction of feed, parallel with paper travel)
 Banding in Scan Direction (across the page, perpendicular to paper travel)
 Uneven Density
 Voids
 Repeating Defects
 Mis-registration
Transfer Unit
 Toner on the back side of the printed page (simplex mode)
 Light Prints
 Repeating Defects
 Mis-registration - only when there is obvious damage to the belt.
Fuser
 Hot or Cold Offsetting
 Repeating Defects
 Dark Streaks in Process Direction
LED Head
 Streaks in the Process Direction
 Uneven Density in the Scan Direction
Test Prints
A variety of test prints are available to aid in determining the quality of output from the
printer and to assist in troubleshooting. See sections 2.8.3 and 2.8.5 for details.
3.2 Using New Consumable Units for Testing Purposes
The printer unit will allow you to utilize new consumable units for print quality diagnosis
and troubleshooting purposes.
Note! When using new units (Drum, Transfer Belt, Fuser) to assist in troubleshooting,
you should temporarily set the printer to “Factory Mode” (See Section 2.8.8). Setting
to factory mode will allow you to use brand new units for testing purposes without
cutting the fuse.
Caution! Be sure to reset the printer to “Shipping Mode” when testing is complete.
Leaving the printer in Factory Mode may cause erratic operation of the MFP.
3.3 Things to observe when analyzing Test Pages
 Streaks in Process Direction (in the direction of feed, parallel with paper travel)
 Banding in Scan Direction (across the page, perpendicular to paper travel)
 Uneven Density
 Voids
 Repeating Defects
 Mis-registration
Note: Consult the “Repeating Defect Spacing Chart” below.

Oki MC361 Specifications

Printing Specifications

print speed color	23 ppm
print speed black & white	25 ppm
time to first page color	9 seconds
time to first page black & white	8.5 seconds
print resolution	1200 x 600 dpi

Copying Specifications

copy speed color	23 cpm
copy speed black & white	25 cpm
first copy out color	14 seconds
first copy out black & white	12 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan resolution	1200 x 1200 dpi
scan speed color	3 sec./page
scan speed black & white	2 sec./page

Fax Specifications

fax modem speed	33.6 Kbps
transmission speed	3 seconds/page
fax resolution	200 x 400 dpi

Power and Environment

power consumption operating	500W
power consumption max	1170W
power consumption idle	100W

Weight and Dimensions

size	16.8" x 20" x 17.5"
weight	63 lb.
weight with consumables	29 kg