Oki MC361 User Manual

2.8.4 Color Registration Adjustment Test
The color registration adjustment test is used for adjusting color registration or
investigating the causes of color misregistration.
1. Enter the self-diagnostic mode and, until the following message appears, press [2]
or [8].
2. Press the [6] button and the following message appears. Press [2] or [8] until a
target option appears.
3. Press the OK button, and the displayed test option is performed.
When REG ADJ EXECUTE is executed:
a. A color registration adjustment test starts (the ONLINE lamp starts
blinking).
b. When the test ends, the upper display shows the result of the test (OK or
an error name), and the lower display shows ****RESULT.
Pressing [2] displays the next test result. Pressing the [8] displays the preceding
test result. Pressing [4] restores the state for step 2.
Remark: While the printer is initialized or issues an alarm or the cover is open, it
displays the following message:
c. Pressing the [#] button during the test cancels the test (turning on the
ONLINE lamp), restoring the state for step 2.
When REG ADJ RESULT is executed:
Same button operations as used when REG ADJ EXECUTE is executed.
32

Oki MC361 Specifications

Printing Specifications

print speed color	23 ppm
print speed black & white	25 ppm
time to first page color	9 seconds
time to first page black & white	8.5 seconds
print resolution	1200 x 600 dpi

Copying Specifications

copy speed color	23 cpm
copy speed black & white	25 cpm
first copy out color	14 seconds
first copy out black & white	12 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan resolution	1200 x 1200 dpi
scan speed color	3 sec./page
scan speed black & white	2 sec./page

Fax Specifications

fax modem speed	33.6 Kbps
transmission speed	3 seconds/page
fax resolution	200 x 400 dpi

Power and Environment

power consumption operating	500W
power consumption max	1170W
power consumption idle	100W

Weight and Dimensions

size	16.8" x 20" x 17.5"
weight	63 lb.
weight with consumables	29 kg