35
4. Repeat step 3 when necessary.
5. Press [4] to end the test (the state for step 1 is restored).
Density adjustment test items
Display Detail
DENS ADJ EXECUTE Executes density adjustment.
DENS ADJ PAR-SET Sets a control value for auto density adjustment.
DENS ADJ RESULT Displays the result of density adjustment.
AUTO CALIBRATION Automatically sets a density sensor sensitivity correction value.
AUTO CALIB BLACK Automatically sets a black density sensor sensitivity correction value.
2.8.6 Consumable Counter Display
The consumable counter display is used for viewing the usage of consumables.
1. Enter the normal self-diagnostic mode and, until CONSUMABLE STATUS
appears, press [2] or [8] ([2] displays the next test option and [8] displays the
preceding test option). Then press the [6] button.
2. Press [2] or [8], and the usage of each consumable appears (the [*] or [#] button is
disabled).
3. Press [4] to end the option (the state for step 1 is restored).
Upper Display Lower Display Format Unit Detail
K-ID UNIT ********IMAGES Decimal Images
Y-ID UNIT ********IMAGES Decimal Images
M-ID UNIT ********IMAGES Decimal Images
C-ID UNIT ********IMAGES Decimal Images
Each display the number of turns
performed to date after the
installation of a new image drum
unit, converted on an A4 and
three-pages-per job basis.
FUSER UNIT ********PRINTS Decimal Prints Displays the number of pages
printed to date after the
installation of a new fuser unit.
TR BELT UNIT ********IMAGES Decimal Images Displays the number of pages
printed to date after the
installation of a new belt unit.
K-TONER
(FULL)
********% Decimal %
Y-TONER
(FULL)
********% Decimal %
M-TONER
(FULL)
********% Decimal %
C-TONER
(FULL)
********% Decimal %
Each displays the usage of toner
of a color.
K-STC MODE
CNT
********TIMES Decimal Times
Y-STC MODE
CNT
********TIMES Decimal Times
M-STC MODE
CNT
********TIMES Decimal Times
C-STC MODE
CNT
********TIMES Decimal Times
Each displays the print dot count
of toner of a color (life counter
value after the printer goes into
operation).
To Next Page
Loading...
