Why is my Oki All in One Printer taking a long time to start copying?
If your Oki All in One Printer is taking a long time to start copying, it might be in the process of preparing. If [Warming Up] or [Preparing] is displayed on the screen, wait until the process is complete and the copy starts.
What to do if a part of the document image is missing on the copied output from my Oki All in One Printer?
If a part of the document image is missing on the copied output from your Oki All in One Printer, ensure that [Edge Erase], [Margin], and [N-in-1] are all set to [OFF].
Why is the copied output different from the original document on my Oki All in One Printer?
If the copied output differs from the original document on your Oki All in One Printer, check if [Duplex Copy] is set to [OFF(Simplex)] and [Mixed Size] is set to [OFF].
How to fix the IP address if it is incorrect while printing from my Oki All in One Printer?
To resolve an incorrect IP address while printing from your Oki All in One Printer: * Check that the same IP address is set for the machine and the machine's port setting on the computer. * Ensure the IP address is not duplicated by another device. * Verify that the correct IP address, subnet mask, and gateway address are set. * If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.
How to fix incorrect network connection settings while printing with my Oki All in One Printer?
To fix incorrect network connection settings while printing with your Oki All in One Printer: * If you are using a cross cable, use a straight cable instead. * Ensure cables are connected before turning the machine on. * If there is a problem with hub compatibility, press the (SETTING) button, select [Admin Setup] > [Network Menu] > [Network Setup] > [Network Setting] > [HUB Link Setting], and then change the setting. * To connect to a wired network, set [Wired] for the network connection to [Enable].
What to do if a copy job is cancelled on Oki All in One Printer?
If a copy job is cancelled on your Oki All in One Printer, it may be due to an error. Clear the error and try copying again. If you're using the MP tray, ensure enough paper is loaded before starting. Press the (SETTING) button, select [Paper Setup] > [Select Tray] > [Copy] > [MP Tray], and check that [ON] or [ON(Prior)] is selected.
What to do if the copied output size is different from the original document size on my Oki All in One Printer?
If the copied output size differs from the original document size on your Oki All in One Printer, ensure that the proper size paper for the document is loaded in the paper tray. Also, verify that the zoom rate is properly set and that [Repeat] is set to [OFF].
Defines WARNING and CAUTION symbols for safety information.
Provides general safety warnings about machine operation and handling.
Details the required environmental conditions and installation space for the machine.
Provides step-by-step instructions for safely unpacking and installing the machine.
Details the correct procedure and safety precautions for connecting the power cord.
Provides instructions for connecting the machine to a network or computer via cable.
Provides detailed steps for connecting the machine to a wireless network.
Guides the installation of necessary printer, scanner, and fax drivers on computers.
Explains the functions and usage of buttons and the display on the operator panel.
Provides detailed instructions and cautions for replacing toner cartridges and image drums.
Offers solutions for various paper jam error codes and procedures.
Provides steps to resolve document jams in the Automatic Document Feeder.
Lists and explains various error messages displayed on the machine's operator panel.
General| Print Technology | LED |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Print Speed (Black) | 30 ppm |
| Print Speed (Color) | 30 ppm |
| Functions | Print, Copy, Scan, Fax |
| Copy Speed (Black) | 30 cpm |
| Copy Speed (Color) | 30 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Type | Flatbed, ADF |
| Scan Resolution | 600 x 600 dpi |
| Fax Modem Speed | 33.6 kbps |
| Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Duplex Printing | Yes |
| Automatic Document Feeder (ADF) | 50 sheets |
| Weight | 29 kg |
| Fax Transmission Speed | 3 seconds per page |
| Connectivity | USB, Ethernet, Wireless |
| Mobile Printing | AirPrint, Google Cloud Print |
| Operating System Compatibility | Windows, macOS |
| Monthly Duty Cycle | 60, 000 pages |
To Next Page
