Oki ML3320 - Page 35

Operating instructions > 35
Bottom
Feed
Line Spacing Select line feed pitch. 6 LPI
8 LPI
Form Tear -Off When printer is idle (0.5,
1.0 or 2.0 sec), paper is
advanced from the
current print position to
the tear position. When
data is received, paper is
moved to its original
printing position.
Off
0.5 sec
1.0 sec
2.0 sec
Skip Over
Perforation
Select whether to skip
over perforation or not.
(When a skip over
perforation command is
received, the received
command is given
priority.)
No
Yes
Page width
(Displayed only for
ML3321ECO/
ML3391ECO)
Change to 8” to print on
narrow paper.
345.44 mm (13.6”)
203.2 mm (8”)
Page Length Select the length of a
continuous form.
279.4 mm (11”)
296.3 mm (11 2/3”)
304.8 mm (12”)
355.6 mm (14”)
431.8 mm (17”)
76.2 mm (3”)
82.6 mm (3.25”)
88.9 mm (3.5”)
101.6 mm (4”)
127.0 mm (5”)
139.7 mm (5.5”)
152.4 mm (6”)
177.8 mm (7”)
203.2 mm (8”)
215.9 mm (8.5”)
GROUP ITEM FUNCTION SETS
ML3320ECO/
ML3321ECO
ML3390ECO/
ML3391ECO