ML690/ML691 User’s Guide 16
Note: These instructions assume you have ready access
to the back of the printer. If you do not, skip
down to “Front Feed.”
Make sure the printer is turned ON.
Make sure the Paper Type lever is in the REAR
feed position:
Open the access cover (1) and set the Paper
Thickness lever to suit the paper. Close the cover.
1.
2.
3.
Rear Feed
Note: If you have any paper in the paper path, remove
it before installing rear feed paper.
1 Lock Lever
2 Upper Tractor Cover
3 Pins
1
1
2
3
To Next Page
Loading...
