ML690/ML691 User’s Guide 44
Menu Settings Table
For a complete explanation of each menu item, see “Explanations of Menu Items” later in this chapter.
The table below shows the items which may appear in the menu. Settings which are engaged at the factory
(defaults) are set in bold italic. Some groups or entries will only appear when a specic emulation is engaged,
as noted.
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Printer
Control
Emulation Mode Selects the printer command set
(emulation) you want to engage.
Epson LQ, IBM PPR, IBM AGM
Font Print Mode Choose the quality and typeface of
printing. If you are printing draft-
type documents, select DRAFT or
HSD.
LQ Courier, LQ Roman, LQ Swiss,
LQ Swiss Bold, LQ Orator, LQ Gothic,
LQ Prestige, LQ OCR-A, LQ OCR-B,
Draft, HSD
Pitch Choose the character width, in
characters per inch (cpi).
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20
cpi
Proportional Spacing Change the setting to Yes to
engage proportional spacing of
characters.
No, Yes
Style Change to italics if you want the
printed characters to be slanted.
Normal, Italics
To Next Page
Loading...
