ML690/ML691 User’s Guide 33
Paper Park
Important!
Never park labels!
Paper park allows you to switch to single-sheet
printing without removing continuous feed paper
from the printer.
To print single cut sheets:
Tear off the last page of the continuous form
paper.
Press the LOAD/EJECT key; this causes a Paper
Empty alarm.
Move the Paper Type lever to the Cut Sheet
position.
Load the cut sheet of paper.
To activate the continuous form paper again:
Remove cut-sheet paper from the printer.
Move the Paper Type lever to Continuous.
Press the FF/LOAD key.
1.
2.
3.
4.
1.
2.
3.
Setting the Paper Thickness Lever
There are 8 lever positions to adjust printing for the
thickness of the paper.
CAUTION!
Make sure the printer is turned off before you open the
access cover.
To adjust the lever, open the access cover and move
the lever (1) to the recommended setting from the
following tables.
1
To Next Page
Loading...
