ML690/ML691 User’s Guide 74
Clearing Paper Jams
Continuous Feed Paper Jams
WARNING: Do not carry out any operations
inside the printer with the Power Switch
set to ON.
Make sure the printer is turned OFF.
Open the access cover.
Tear off any unprinted continuous forms.
Remove the top Paper Tray by holding
the tray by the tabs on both sides
and pulling it up from the printer.
1.
2.
3.
4.
Raise each Pin Tractor cover and remove
the continuous forms from the Pin Tractors.
Rotate the platen knob and remove the forms
from the front of the printer.
If a form fragment remains inside the printer,
place two or three forms in a stack on the Pin
Tractors and turn the platen knob to push the
fragment out of the printer.
5.
6.
7.
To Next Page
Loading...
