Oki ML690 - Ejecting Cut Sheet Paper

ML690/ML691 User’s Guide 25
To advance the paper in small steps, press LF/FF.
NOTES:
> Make sure that the paper is accurately aligned
along the Paper Guide to avoid the possibility of
skewed printing or paper jams.
> When printing an envelope, do not open up the
ap.
> If you are feeding thick paper, push it in
sufciently until it touches the feed roller to avoid
the possibility of skewed printing or paper jams.
8.
Ejecting Cut Sheet Paper
When the printer reaches the end of the cut sheet
page it automatically ejects the page. If required,
add another sheet for the printer to continue printing
from where it left off.
To eject a cut sheet left in the printer, follow these
steps:
Press the SEL button to take the printer off-line.
Press LOAD/EJECT to eject the paper to the paper
tray.
1.
2.
1
2