Oki ML690 - Page 24

ML690/ML691 User’s Guide 24
Set the left margin of the paper by adjusting the
appropriate Paper Guides (1) along the scale (2)
relative to the start of the printed line marker
arrow.
5.
Open the access cover and adjust the Paper
Thickness lever (1) to suit the paper. Close the
cover.
NOTE: If the Paper Thickness lever setting does not
match the paper, paper feeding and printing
may not work properly.
With the printing side downwards for top feed
and upwards for front feed and the left edge
aligned with the Paper Guide (1), carefully insert
the paper on the Paper Tray (2) and into the
printer until it is gripped.
6.
7.
1
2
1
1
2
2
1