EasyManua.ls Logo

Oki MPS2731mc - Page 180

Oki MPS2731mc
314 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44952001TH Rev.2
5-33
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
• IfyouwanttospecifythePUserialnumber,pleaseadda"0"(a
normal-widthzero)theninputthe11-digitnumber.(Pleasenotice
that when read out, the number will be 10 digits.)
As shown in the following image, on the menu of [PU serial
number setting], eliminate the 2-digit revision number then add a
normal-widthzerotothe10-digitnumberandinputit.
• Onthemenuof[Section2.4.1.1.4.3,Serialnumberinformation
setting] of [Section 2.4.1.1.4 CU circuit board setting function],
set the [Choose printer serial number] to [CU serial number] and
[Output mode] to [Show both].
• IfyouwanttospecifytheCUserialnumber,pleaseinputthe
12-digit number. (When read out, it will be 12 digits, too.)
Figure of Serial No. label image (labeled in UK Factory)
Add one-byte 0 to the top of 10-digit figure of Lot.NO.
Set "0AE47027880" in the setting screen.
Revision
Ser.NO. 4AEL4011702K
Lot.NO. AE47027880 A0
Made in Thailand
Configured in UK
• PUserialnumberwillbeoutputtothePrinterSerialNumber
column in the header of Status Page. For this reason, check of PU
serial number is performed by printing
Status Page.
• AfterthecongurationintheUKfactory,whenfacingOEL,the
PU serial number is taken as Lot Number and shown in the Lot
Number: column of the last line which is in the header of the
Status Page.
(1-2) Set the CU serial number
SAP serial number can be applied to the device. The SAP serial
number is displayed in the highest rung of the serial number label. It
is a 12-digit number including production place (2 digits), production
year (2 digits), sequence number (6 digits) and revision number (2
digits).
• CUserialnumberisgivenanoriginalnumberwhichiswithin12
digits in the UK factory.
• PleasenoticethatifyousettheCUserialnumber,themenu
setting in CU will be reset (back to the default setting). (For
reference, Maintenance utility operation manual)
Figure of Serial No. label image (labeled in UK Factory)
Input 12 digits for Ser. NO. Input "4AEL4011702K".
Ser.NO. 4AEL4011702K
Lot.NO. AE47027880 A0
Made in Thailand
Configured in UK
• CUserialnumberisshowninthePrinterSerialNumberColumnin
the header of Status Page. Therefore, the confirmation of the CU
serial number after the change can be done by printing the Status
Page.
• ThePUserialnumberisshownintheLotNumber:columnofthe
last line which is in the header of the MenuMap.

Table of Contents

Other manuals for Oki MPS2731mc

Related product manuals