Oki MPS2731mc - Cleaning Rollers in the ADF

44952001TH Rev.2
6-8
Oki Data CONFIDENTIAL
6. REGULAR MAINTENANCE
6.6 Cleaning Rollers in the ADF
If the document feeding rollers in the ADF are contaminated with ink, toner particles or
paperdust,documentsandoutputsgetdirtyandapaperjammayoccur.Topreventthis,itis
recommended to clean the rollers once a month.
(1) Thrn off the power of MFP.
(2) Open the ADF cover.
Note! If the rollers get too dirty, wipe them with a soft cloth lightly moistened with
neutral detergent, and then wipe it again with a soft cloth lightly moistened with
water.
(4) Close the ADF Cover.
(3) Wipe the document feeding rollers with a soft cloth lightly moistened with water.
Wipe the whole surface of the roller and rubber pad while turning it with your hand.
Document feed roller
Rubber Pad