Oki MPS2731mc - Page 196

44952001TH Rev.2
7-4
Oki Data CONFIDENTIAL
7. TROUBLESHOOTING PROCEDURES
No. Category
PJL
Status
Code
Error Warning Description
3 Initializing - 1
2
3
4
5
Flash Memory Format Displays that Flash memory is
being formatted.
It is displayed it when
Resident/Option Flash
memory not fomented are
detected,or"ServiceMenu"-
"SystemMaintenance"-
"FormatFlashMemory"ofa
system maintenance menu is
performed.
The function mentioned above
is secret to users. Therefore,
this status does not occur in a
user environment.
4 Initializing - 1
2
3
4
5
Checking File System Displays that SD Card file
system is being checked.
Process Check of File
System is valid to start from
"Management"-"Storage
MaintenanceSetup"ofAdmin
SetupMenu,or"CheckFile
System"ofBootMenu.
5 Initializing - 1
2
3
4
5
Erasing Disk Indicates that the SD Card is
being erased.
Erase process of the hard
disk is valid to start from
"Management"-"Storage
MaintenanceSetup"-"Erase
SDMemoryCard"ofAdmin
Setup Menu.
No. Category
PJL
Status
Code
Error Warning Description
6 Initializing - 1
2
3
4
5
%STORAGE% Error: %ERRCODE%
To %STORAGE%
format, select [Format]
To shut down, select [Cancel]
%ERRCODE% : 0
Indicates that the unformatted
storage is detected during the
initializing.
%ERRCODE% : 250
Indicates that machine
detected broken file about
secure print.
Needs to format once again.
[Format] pressed, Storage
format is started and the unit is
rebooted automatically.
[Cancel] pressed, the unit is
shut down.
---------------------------------
The following is changed by a
status parameter.
%STORAGE% :
HDD
SD Card
%ERRCODE% :
Error Code
7 Shutdown - 1
2
3
4
5
Shutdown in progress. It is shown that a unit is
shutting down.