Oki MPS2731mc - Page 230

44952001TH Rev.2
7-38
Oki Data CONFIDENTIAL
7. TROUBLESHOOTING PROCEDURES
No.
Category
PJL Status
Code
Error Warning Description
74 Error - 1
2
3
4
5
Memory Overflow
¥356¥200¥204Close
The same type of status
as STATUS_ID_FAX_S_
MEMORY_OVERFLOW
Indicates that memory
overflow has occurred
during ScanToFax.
75 Error - 1
2
3
4
5
Memory Overflow
¥356¥200¥204Close
Similar error to STATUS_I
D_FAX_S_MEMORY_OV
ERFLOW
Indicates that memory
overflow has occurred
while fax is being
received.
76 Error - 1
2
3
4
5
Wireless startup failed.
Please see Help for details.
This message indicates
that an error occurred
in the communication
between the Wireless
Bridge.
(This status occurs only
machine wireless LAN
support.)
77 Error - 1
2
3
4
5
This wireless firmware version
does not operate on this device.
Please see Help for details.
This message indicates
that the mismatch of
"MajorVersion"between
Wireless Bridge
occurred.
(This status occurs only
machine wireless LAN
support.)
78 Error - 1
2
3
4
5
Wireless settings are incomplete.
Please see Help for details.
This message indicates
that the settings are not
correct.
(This status occurs only
machine wireless LAN
support.)
No.
Category
PJL Status
Code
Error Warning Description
79 Error - 1
2
3
4
5
Not connected to wireless access
point.
Please see Help for details.
This message indicates
that the connection to
the access point has not
been established.
(This status occurs only
machine wireless LAN
support.)
80 Error - 1
2
3
4
5
Firmware Update Error
Please try again.
If network doesn't work, please
try firmware update over USB.
This message indicates
that the remote FW
update failed.
Scanning function
and print function is
prohibited. However, the
process of MJL / PJL
command is possible.