Oki MPS2731mc - Scan to Local PC and Remote PC

44952001TH Rev.2
3-9
Oki Data CONFIDENTIAL
3. MFP INSTALLATION
Loading Paper in Tray 1 and Tray 2
The following procedure explains how to load paper in tray 1 or tray 2 (optional).
Note! The following procedure uses tray 1 as an example.
Reference Toloadcustomsizepaperonthetray,needtoregisterthesizein[Paper
Setup].
(1) Flex paper back and forth, and then fan it. Straighten the edges of the paper stack
on a level surface.
(2) Pull out the paper tray.
(3) Slide the paper width guide to the width of paper to be loaded.
(4) Slide the paper stopper to the length of paper to be loaded.
 Ifloadinglegalsizepaper,pulloutthesubsupportandthenslidethepaperstopper.
Paper guide width
Paper stopper