Oki MPS2731mc - Page 72

44952001TH Rev.2
3-11
Oki Data CONFIDENTIAL
3. MFP INSTALLATION
(4) Adjustthepaperwidthguidetothewidthofpapertobeloaded.
(5) Insert the paper with the print side face up until its edge touches the paper feed
entrance.
Note! When loading envelopes on the MP tray, load them face up with short edge
into the machine. The flap should come to the right side to the feeding
direction.
“ ” mark
(6) Adjustthepaperwidthguidetoholdthepaperinplace.
(7) Press the tray latch button.
Register the loaded paper on the MFP.
Important • Donotloadpaperabovethellline.
 • Donotloadpaperofdifferentsizes,typesorweightsatthesame
time.
 • Whenaddingpaper,removethepaperontheMPtrayandstraighten
the edges of both stacks of paper, and then load them again.
 • Donotputanythingotherthanpaperforprinting.Donotapplytoo
much pressure on the MP tray.
Latch button