Oki MPS2731mc - Page 78

44952001TH Rev.2
3-17
Oki Data CONFIDENTIAL
3. MFP INSTALLATION
(4) For the network connection, select [Get installable options automatically] under
[Installable Options], and then click [Setup].
For the USB connection, select [2-Tray Module] for [Available Tray] under [Installable
Options].
(5) Click [OK].
For Mac OS X PS Driver (Mac OS X 10.3.9 to 10.4.11)
Note! •ThisprocedureusesMacOSX10.4.11asanexample.
 •ThisprocedureusesMC562driverasanexample.
(1) From [Go], select [Utilities] and then double-click [Printer Setup Utility].
(2) Select the name of your machine and then click [Show Info].
(3) Select [Installable Options].
(4) Select the total number of trays installed on your machine for [Available Tray], and
then click [Apply Changes].
(5) Close [Printer Info].
For Mac OS X PS Driver (Mac OS X 10.5 and 10.7)
Note! •ThisprocedureusesMacOSX10.7asanexample.
 •ThisprocedureusesMC562driverasanexample.
(1) Select [System Preferences] from the Apple menu.
(2) Click [Print & Scan]*.
(3) Select the name of your machine and then click [Options & Supplies].
(4) Select the [Driver] tab.
(5) Select the total number of trays installed on your machine for [Available Tray], and
then click [OK].
* For Mac OS X 10.5, click [Print & Fax].