Oki Data CONFIDENTIAL
43627911TH Rev. 3
172 /
6.4 Pickup Roller Cleaning
Clean the pickup roller if there is any problem with paper feeding.
Note! Use a soft
cloth, etc. with alcohol to clean the roller surface, with care not to scratch
or damage the surface during the process.
Cleaning LED Head
Do the cleaning in case of light print, white line, or blurred print.
(1) Grasp the Top Cover Handle and open the Top Cover.
(2) Gently wipe the lens surface of the LED Head (4 places) using the LED lens cleaner or
soft
tissue.
Note! Do not use solvents such as methyl alcohol or thinner as they will damage the lens
surface.
Memo An LED lens cleaner is enclosed in an optional replacement toner cartridge.
Do not touch it.The Fuser Unit is very hot. Do not touch it.
(3) Close the Top Cover.
To Next Page
Loading...
Need help?
General
