Oki Data CONFIDENTIAL
43627911TH Rev. 3
88 /
(2) USB Connection
1. P
repare a USB cable.
Note!
•
No cables are included with the product. Prepare a cable.
•
A cable to be prepared must be a USB cable.
•
For connecting the printer in USB 2.0 Hi-Speed mode, use a Hi-Speed USB
cable.
2. Power off printer and personal computer
Memo: The USB cable can be plugged in and off with the printer powered on. For the
purpose of printer driver and USB driver installation to be performed later, power
off the printer.
3. Connect personal computer and printer
(1) Plug a prepared USB cable in the USB interface connector of the printer.
(2) Plug the cable in the USB interface connector of the personal computer.
Note! Be careful not to plug the USB cable in the network interface connectors; a
problem with the printer may result.
To Next Page
Loading...
Need help?
General
