2
IMPORTANT SAFETY FEATURES
• Observe all special notes which indicate differences between various types of sheds.
• You should not try to assemble the shed on your own. Get a second person to help you.
• The statutory requirements of the local building authorities must be observed.
• Safety gloves should be worn during assembly.
• Safety glasses should be worn during assembly.
• Preferably in a long sleeve shirt.
• Beware of sharp edges.
• WINTER SERVICE: The roof is designed for a snow load of 75 kg/m2. In order to avoid overload of the roof, timely removal
of snow from the roof area is recommended.
If the garden shed is unattended for lengthy periods during the winter months, the roofs should be propped up as a safety
precaution.
INSTALLATION ADVICE
MODEL
NO.
APPROX. ROOF
DIMENSIONS
OVERALL
HEIGHT
APPROX. BASE
DIMENSIONS
APPROX. FOUNDATION
DIMENSIONS
DYNABOLT
6.5mm x 40mm
FE FEET ET MM FEET MM FEET MM FEET MM QTY
1015A 10' x 15' 3070 x 4637 79.92" 2030 9'8" x 14'8" 2960 x 4540 10' x 15' 3070 x 4640 27
1015A2 10' x 15' 3070 x 4637 88.5" 2250 9'8" x 14'8" 2960 x 4540 10' x 15' 3070 x 4640 27
1019A 10' x 19' 3070 x 5880 79.92" 2030 9'8" x 18'8" 2960 x 5780 10' x 19' 3070 x 5885 29
1019A2 10' x 19' 3070 x 5880 88.5" 2250 9'8" x 18'8" 2960 x 5780 10' x 19' 3070 x 5885 29
THE MANUFACTURERS CANNOT BE HELD RESPONSIBLE FOR ANY CONSEQUENCES DUE TO SHEDS THAT ARE
NOT ERECTED PER INSTRUCTIONS OR FOR DAMAGE DUE TO WEATHER CONDITIONS OR ACTS OF GOD. PARTS
MAY CONTAIN SHARP EDGES & CORNERS. CARE MUST BE TAKEN WHEN HANDLING VARIOUS PIECES TO AVOID
AN ACCIDENT, FOR SAFETY SAKE, PLEASE USE A PAIR OF WORK GLOVES & EYE PROTECTION WHEN
ASSEMBLING OR PERFORMING ANY MAINTENANCE ON THE BUILDING.
TOOLS REQUIRED
All the tools listed are required for the erection of the shed. These tools should be at hand before starting work.
1. Step ladder
2. Masonary Drill Bit 6.5mm and suitable power drill
3. Tape measure
4. Cordless power screw driver
5. Phillips No. 2 Screwdriver tip
6. Dyna bolts 6.5mm x 40mm
7. Multi grips
8. 2.8mm and 10mm Steel Drill Bit
9. Hacksaw or Tin Snips
To Next Page
Loading...