36
9.9 Internal fan removal
9.10 Display board removal
Remove the board housing cover (Cf. 9.4 Board housing cover removal,
on p. 33).
Disconnect the connectors.
Remove all the mounting screws (1).
Carefully remove the display board (2) from its seat.
9.11 Electronic assembly housing removal
Remove the body (Cf. 9.2 Body removal, on p. 32).
Remove the board housing cover (Cf. 9.4 Board housing cover removal,
on p. 33).
Disconnect all the electrical unions (1).
Remove the mounting screws (2).
Carefully remove the housing (3) from its seat.
To Next Page
