ENGLISH
13
PROGRAMMING DISCOUNT/ADD-ON KEYS
Two functions -/+1 and -/+2 are present in that can each be programmed to apply either a discount or an add-
on to a sale. The discount or add-on can be applied to an individual item or to the total of a sales transaction. You can
limit the number of digits, i.e. the maximum value of a discount or add-on operation, to make sure that amounts do not
exceed a certain value. The procedure is the same for both keys.
Select
Programming Mode -> Sales Programming -> +/- Setup. Navigate to the field you want to personalize and enter its
data (see “Data Entry Mode” for the keys to use). At the end, you can press to return to the Main menu or
to return to the previous menu.
SETTING UP FOREIGN CURRENCY EXCHANGE RATES
You can program up to four different foreign currency exchange rates. The foreign currency value is displayed when
-
>
FC
is selected during a sales transaction. Select
Programming Mode -> Sales Programming -> Fore ign Currencies
.
Navigate to
the field you want to personalize and enter its data (see “
Data Entry Mode
” for the keys to use). At the end, you can press
to return to the
Main menu
,
to return to the previous menu or
to skip to the next form in sequence.
PROGRAMMING INSTORE EMBEDDED PRICE BARCODES
The barcode reader must be able to read 8-digit or 13-digit EAN/UPC barcodes. EAN/UPC codes read from a product
barcode label represent a standard numbering structure that identifies the product being sold. The barcode with the
embedded price of an article has a specific structure that depends on the country in which it will be used and the EAN/
UPC code you wish to use. You can program up to 10 different barcode configurations. Select
Programming Mode ->
Sales Programming -> Instore Barcode. Navigate to the field you want to personalize and enter its data (see “Data Entry
Mode” for the keys to use). At the end, you can press to return to the Main menu, to return to the
previous menu or to skip to the next form in sequence.
Menu Item Possible Values Description
+/-1 SIGN MINUS, PLUS Specify the key function: MINUS - a discount, PLUS - an add-on value.
+/-1 HALO
NO LMT, 0.99,
9.99, 99.99, 999.99
Select the maximum number of digits for the discount or add-on that can be
specified for the -/+1 function. Default: NO LMT - No limit.
+/- 2 SIGN MINUS, PLUS Specify the key function: MINUS - a discount, PLUS - an add-on value.
+/-2 HALO
NO LMT, 0.99,
9.99, 99.99, 999.99
Select the maximum number of digits of the discount or add-on that can be
specified for the -/+2 function. Default: NO LMT - No limit.
Menu Item Possible Values Description
FOREIGN
CURRENCIES
1 to 4 Select the number of the foreign currency you want to program.
Press
to scroll through the numbers in sequence.
NAME (Caption) Enter a max. 10-character caption to identify the foreign currency.
DEC. POS. RATE 0 to 8 Enter a single digit to indicate the position of the decimal point in the
exchange rate specified for EXCH. RATE (below). Default: 0.
DEC. POS. AMNT 0 to 3 Enter a single digit to indicate the position of the decimal point in the
converted amount. Default: 2.
EXCH. RATE (Numeric)
Enter the 6-digit currency exchange rate to apply when converting the
foreign currency to the local currency (numeric value, without decimal
point). For example, to program the rate £1 = 1.471 EUR, type 3 for
DEC
.
POS. RATE
; type 2 for
DEC. POS. AMNT
and type 001471 for
EXCH. RATE.
To Next Page
Loading...
