Olivetti ECR 7900 - Individual Clerk; Electronic Journal; Function Key Setup

16
OPERATION MODE
In this form you can specify options affecting financial transactions such as VAT rates, and other system options.
Select
Programming Mode -> Configuration Setup -> Operation Mode. Navigate to the field you want to personalize and
enter its data (see “Data Entry Mode” for the keys to use). At the end, press to return to the Main menu,or
to return to the previous menu.
NOTE: Before changing a VAT rate it is recommended that you first print a Z Financial report (see "X and Z
Reports”). For other VAT-related features, see "Printing VAT Information on Customer Receipts".
ECR NUMBER (Numeric) Enter a 4-digit Cash Register Identification Number. This number is
printed on the sales receipts, journal records and management reports
issued by the cash register. It is useful to identify the cash register when
more than one cash register is used in the business.
KEY TONE YES, NO Key touch-tone audible signal: YES - Enable, NO - Disable.
RECEIPT MODE RECEIPT,
JOURNAL
RECEIPT = Print receipts, JOURNAL - Save data in journal only, no receipt
printing.
WINDING MOTOR EJ RPT,
PG/X/Z
Paper winding motor activation: EJ RPT - Motor is activated only when EJ
report is being printed, PG/X/Z - Motor is activated during Programming,
X and Z modes.
Menu Item Possible Values Description
VAT Calc
Mode
VAT, ADD-ON Tax rate to apply to calculations: ADD-ON - Add-on tax rate, VAT - Value
Added Tax.
Ta x1 R at e (Numeric) Enter a 5-digit number to represent the VAT rate to associate with Tax Rate 1
- THREE digits come after the decimal point.
Ta x2 R at e (Numeric) The same criteria apply as for entering Tax 1 rate.
Ta x3 R at e (Numeric) The same criteria apply as for entering Tax 1 rate.
Ta x4 R at e (Numeric) The same criteria apply as for entering Tax 1 rate.
FC Conv Type DIVIDE,
M U LT IP LY
DIVIDE = Use division for foreign currency conversion calculation, MULTIPLY =
Use multiplication for foreign currency conversion.
%& +/- DEP
CALC
NET, BRUT Assign +/- and %+/- results to departments.
0 Price Reg YES, NO Allow zero prices to be registered. YES - Enable, NO - Disable.
Post Tender YES, NO Allow other transactions to be entered after tender has been registered. YES
- Enable (default), NO - Disable.
Decimal 0, 1, 2, 3 Set the number of digits after the decimal point. Enter 1 digit for the decimal
position. For example, if 2 is specified, the format used for decimal numbers is
to two decimal places: x.xx
Rounding DOWN, UP, OFF Activate fraction rounding in calculations. Fraction rounding is used to round
figures with decimals up or down to the nearest whole numbers, and is used
for percent tax and percent discount calculations. UP - a fraction of one pence
is rounded up one pence, DOWN - a fraction of one pence is rounded down
one pence, OFF - a fraction over half a pence is rounded up, a fraction equal
to or under half a pence is rounded down.
Menu Item Possible Values Description