1-12 Printer features
Print head
Technology: impact (ballistic)
Needles: 9
Needle diameter: 0.3 mm
Matrix geometry: not aligned
Maximum frequency: 1566 Hz, when printing on rolls;
1381 Hz, when printing on a document
Needle energizing time 210-260 µsec according to the current
voltage and print head temperature
Print head life: > 600 million dots/needle
Cutter
The cutter performs automatic cutting of receipts from a roll 70 or 57 mm wide.
Cutting is not continuous, but leaves a central non-cut portion for multiple receipts.
Cutter life ranges from 250 to 350 thousand cuts.
Important
: for longer life, the cutter must be maintained clean and free of all paper shreds.
MICR reader
With the MICR reader option installed, the printer can read the CMC7 or E13B magnetic
characters of cheque code lines.
Legible cheques must be conforming to ISO recommendations 2033-1983.
Ribbon cartridge
Ink type: 1056
Ribbon type: black fabric
Ribbon length: 13 meters
Cartridge life: - Black ribbon: 4 million characters
- Purple ribbon: 7 million characters
Replacement: with printer on or with manual positioning with the printer off
To Next Page
Loading...
