Epson TM-U950 Commands 4-27
ESC p
m
t1 t2
Generate pulse
Hexadecimal code: 1B 70 ..
Range:
m = 0, 1, 48, 49
t1 = 0-255
t2 = 0-255
Outputs the pulse specified by t1 and t2 to connector pin
m
as follows:
m Connector pin
0, 48 Drawer kick-out connector pin 2
1, 49 Drawer kick-out connector pin 5
Notes:
-
The pulse ON time is [
t1
x 10] ms and the OFF time is [
t2
x 10] ms.
-
When
t2 < t1,
the printer processes
t2
as
t1
.
-
The printer starts operation [
t2
x 0,1] seconds after detecting a slip.
-
If
m
is outside the specified range, the printer ignores this command and the following
data is processed as normal data.
ESC t n
Select character code table
Hexadecimal code: 1B 74 n
Range:
n = 0-5; 254; 255
Selects a page
n
from the character code table.
n Page
0 0 PC 437 (USA, Standard Europe)
1 1 Katakana
2 2 PC 850 (Multilingual)
3 3 PC 860 (Portugal)
4 4 PC 863 (Canadian-French)
5 5 PC 865 (Nordic)
254 Space page
255 Space page
Notes:
-
If the value of
n
is out of the specified range, the printer ignores this command.
Default:
n = 0
References:
Epson printable character sets
To Next Page
Loading...
