21
Fig. 25
Fig. 26
Fig. 27
2. Place the AC adapter 3 on top a of the cord hanger 4 (Fig. 25).
3. Bring the cable 5 of the AC adapter into the hole of center part b of
cord hanger. Then, bring it down so that it goes around the bottom
part c of cord hanger and bring it into the hole b again (Fig. 26).
4. Insert the connector 6 of the AC adapter firmly into the connector 7 of
the microscope (Fig. 27).
³
|
5
7
6
To Next Page
Loading...
