Olympus E-M1 MARK II - Card Setup

51
Reset
Restoredefaultsettings.
• Thisoptionisaccessedviathemenus(P.3).
1
PresstheMENUbutton
2
In
W
ShootingMenu1,highlight[Reset / Custom Modes]and
pressthe
Q
button.
3
Usetheupanddownarrowbuttonstohighlight[Reset]andpress
the
Q
button.
4
Usetheupanddownarrowbuttonstohighlightoneofthefollowing
optionsandpressthe
Q
button.
Full
Resetallsettingstodefaultvalues.Thecameraclockandset-
tingssuchaslanguagearenotaffected.
Basic Resetbasicshooting-relatingsettingstotheirdefaultvalues.
5
Pressthe
Q
button.
6
Highlight[Yes]andpressthe
Q
button.
• Settingswillberesettodefaultvalues.
Card Setup
Formatmemorycardsordeleteallimages.
• Thisoptionisaccessedviathemenus(P.3).
■
Format
Cardsmustbeformattedinthecamerabeforerstuseorafterbeingused
withothercamerasorcomputers.
Formattingmemorycardsdeletesalldatastoredonthecard,includingpro-
tectedimages.Beforeformatting,conrmthatthecardcontainsnoimagesyou
wishtokeep.
MENUbutton 
d
tab [Card Setup] selectaslot
1
 [Format]
2


［
Yes
］
1 Onlyiftwocardsareinserted.
2 Displayedifthecardcontainsdata.