Olympus E-M1 MARK II - Setting the date;time

19
■
Recording Movie Audio with an Olympus LS-100 IC
Recorder
WhenmovieaudioisrecordedviaanOlympusLS-100ICrecorder,camera
controlscanbeusedtorecordaslatetoneortostartandstoprecording.
Select[Movie
K
]>[PCM Recorder
K
Link]andchoose[On]forboth[Slate
Tone]and[Synchronized
R
Rec.].YoushouldalsocheckthattheLS-100
rmwarehasbeenupdatedtothelatestversion.
1
ConnectamicrophonetotheLS-100andplugtheLS-100intothe
cameraUSBconnector.
• WhentheLS-100isconnectedviaUSB,amessagewillbedisplayed
promptingyoutochooseaconnectiontype.Select[PCM Recorder].Ifno
messagedisplayed,gotothecustommenusandselect[Auto]for[USB
Mode].
2
Startmovierecording.
• TheLS-100willbeginrecordingaudio.
• Torecordaslatetone,pressandholdthe
Q
button.
3
Endmovierecording.
• TheLS-100willstoprecordingaudio.
AdditionalinformationisavailableinthedocumentationprovidedwiththeLS-100.
Card Slot Settings
Choosethecardslotusedforshootingorplaybackwhentwocardsare
inserted.
• Thisoptionisaccessedviathemenus(P.3).
MENUbutton 
G
tab

Y
tab [Card Slot Settings] 
chooseanoption