114
EN
Menu functions (Custom menus)
4
N Release/j/Image Stabilizer
Option Description
g
Rls Priority S If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF and C-AF modes (P. 43, 51).
—
Rls Priority C
jL Settings You can select from [j], [♦j], [♥j], and [0] for the
sequential shooting speed and shot limit. You can set the
pre-shutter frames for [0]. Figures for sequential shooting
speed are the approximate maximums.
48
jH Settings
O Release/j/Image Stabilizer
Option Description
g
K Image
Stabilizer
Sets image stabilization for still image shooting.
53
j Image
Stabilization
Sets the priority function during sequential shooting.
[Fps Priority]: Shooting speed gets priority over image
stabilization. The sensor will not be reset to the center
during sequential shooting.
[IS Priority]: Image stabilization gets priority over shooting
speed. The sensor will be reset to the center per frame of
sequential shooting. The shooting speed will drop slightly.
—
Half Way Rls
With IS
When set to [Off], the IS (Image Stabilization) function while
the shutter button is pressed halfway will not be activated.
—
Lens I.S. Priority If [On] is selected, priority is given to the lens function
operation when using a lens with an image stabilization
function.
• This option has no effect on lenses that are equipped with
an image stabilization switch.
—
MENU
G N
MENU
G O
To Next Page
Loading...
