15
EN
Preparation
1
Inserting the card
The following types of SD memory card (commercially available) can be used with this
camera: SD, SDHC, SDXC, and Eye-Fi.
Eye-Fi cards
Read “Usable cards” (P. 147) before use.
1
Open the card compartment cover.
2
1
2
Slide the card in until it is locked into place.
• Shooting data will be recorded according to the
selected option for [K Save Settings] (P. 54).
• g “Usable cards” (P. 147)
• Turn off the camera before loading or removing
the card.
• Do not forcibly insert a damaged or deformed
card. Doing so may damage the card slot.
Terminal area
Card slot 1
Card slot 2
3
Close the card compartment cover.
• Close it securely until you hear it click.
• Be sure the card compartment cover is closed before using the
camera.
2
1
• Cards must be formatted with this camera before fi rst use (P. 110).
• If a UHS-II card is inserted into the slot 2 (UHS-I compatible), the card operates as
UHS-I.
• Multiple Eye-Fi cards cannot be used at the same time.
Removing the card
Press the card in to eject it. Pull out the card.
• Do not remove the battery or card while the card write indicator (P. 21)
is displayed.
To Next Page
Loading...
