EasyManua.ls Logo

Olympus E-M10 Mark II - External Fl Ash Units Designated for Use with this Camera

Olympus E-M10 Mark II
201 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
152
EN
Cautions
7
External ash units designated for use with this camera
With this camera, you can use one of the separately sold external ash units to
achieve a ash suited to your needs. The external ashes communicate with the
camera, allowing you to control the camera’s ash modes with various available ash
control modes, such as TTL-AUTO and Super FP ash. An external ash unit speci ed
for use with this camera can be mounted on the camera by attaching it to the camera’s
hot shoe. You can also attach the ash to the ash bracket on the camera using the
bracket cable (optional). Refer to the documentation provided with the external ash
units as well.
The upper limit of the shutter speed is 1/250 sec. when using a ash.
* The sync speed for silent mode and focus bracketing (P. 94) is 1/50 second. The sync
speed at ISO sensitivities of 8000 and above and during ISO bracketing (P. 94) is
1/20 second.
Functions available with external ash units
Optional ash Flash control mode GN (Guide number) (ISO100) RC mode
FL-900R
TTL-AUTO, AUTO,
MANUAL, FP TTL
AUTO, FP MANUAL,
MULTI, RC, SL AUTO,
SL MANUAL
GN58 (200 mm*
1
)
FL-600R
TTL-AUTO, AUTO,
MANUAL, FP TTL
AUTO, FP MANUAL
GN36 (85 mm*
1
) GN20 (24 mm*
1
)
FL-300R TTL-AUTO, MANUAL GN20 (28 mm*
1
)
FL-14
TTL-AUTO, AUTO,
MANUAL
GN14 (28 mm*
1
)–
STF-8 TTL-AUTO, MANUAL GN8.5
*1 The focal length of the lens that can be used (Calculated based on 35 mm lm camera).

Table of Contents

Related product manuals