Olympus E-M10 Mark II - S Disp;8;Pc; T Exp;Iso;Bulb;P

117 EN
Menu functions (Custom menus)
4
S Disp/8/PC
Option Description
g
8 ( Beep sound)
When set to [Off], you can turn off the beep sound that is
emitted when the focus locks by pressing the shutter button.
—
HDMI [Output Size]: Selecting the digital video signal format for
connecting to a TV via an HDMI cable.
[HDMI Control]: Select [On] to allow the camera to be
operated using remotes for TVs that support HDMI control.
This option takes effect when pictures are displayed on a
TV.
[Output Frame Rate]: Select the output frame rate from [50p
Priority] or [60p Priority] for using the camera connected to
a TV with an HDMI cable.
130
USB Mode Choose a mode for connecting the camera to a computer or
printer. Choose [Auto] to display USB mode options every
time the camera is connected. When you select [ 0],
you can use dedicated software to control the camera
from a computer and transfer images from the camera to a
computer. Access the following URL to download and install
the dedicated software. To use [0], you must fi rst set
the mode dial to P, A, S, or M mode.
http://support.olympus-imaging.com/oc1download/index/
—
T Exp/ISO/BULB/p
Option Description
g
Exposure Shift Adjust correct exposure separately for each metering mode.
• This reduces the number of exposure compensation
options available in the selected direction.
• The effects are not visible in the monitor. To make
normal adjustments to the exposure, perform exposure
compensation (P. 39).
—
EV Step Choose the size of the increments used when selecting
shutter speed, aperture, exposure compensation, and other
exposure parameters.
—
ISO Step Select the increments available for choosing ISO sensitivity. —
ISO-Auto Set [Upper Limit / Default]: Choose the upper limit and default
value used for ISO sensitivity when [Auto] is selected for
ISO. [High Limit]: Choose the upper limit for auto ISO
sensitivity selection. [Default]: Choose the default value for
auto ISO sensitivity selection.
The maximum is 6400.
[Lowest S/S Setting]: Automatically sets the shutter speed
when the ISO sensitivity is raised in P and A modes.
If set to [Auto], the camera automatically sets the shutter
speed.
—
ISO-Auto Choose the shooting modes in which [Auto] ISO sensitivity
is available.
[P/A/S]:
Auto ISO sensitivity selection is available in all
modes except
M.
[All]: Auto ISO sensitivity selection is available in all modes.
—
MENU
G S
MENU
G T