Olympus E-M10 Mark II - Adjusting Fl Ash Output (Flash Intensity Control)

60 EN
Shooting
2
Adjusting fl ash output ( Flash intensity control)
Flash output can be adjusted if you fi nd that your subject is overexposed, or is
underexposed even though the exposure in the rest of the frame is appropriate.
1
Press the Q button to display the LV super control
panel.
2
Use FGHIto select [w].
3
Use the front dial to select an option.
H
F + RAW
FullHD
sRGB
+0.8
A + 1
Natural
G + 1
S - AF
F
250250 F5.6
1:02:031:02:03
10231023
0.00.0
100 %
+ 1 + 1
S
Normal
S-IS Auto
M-IS Auto
WB
Auto
ISO
Auto
w
• This setting has no effect when the fl ash control mode for the external fl ash unit is set to
MANUAL.
• Changes to fl ash intensity made with the external fl ash unit are added to those made with
the camera.