Olympus ESG-400 - Connector; Docking Connector; Monopolar Standard 1; Monoploar Standard 2 (Erbe)

ESG-400
6 Connector
6-1 Docking Connector
1) BNE – Bipolar Neutral Electrode
2) BAE – Bipolar Active Electrode
3) MAE – Monopolar Active Electrode
4) Common CD – Common ground for connection detection
5) MAPCAE – Monopolar Active Electrode
11) CD APC – Active pin for connection detection
12) CD NEO – Active pin for connection detection
6-2 Monopolar Standard 1
Type: 3 pin Valleylab, pin diameter = 4mm
1 pin BOVIE, pin diameter = 8 mm
Function: Monopolar output
Finger switch input (only for Valleylab: cut and coag)
6-3 Monoploar Standard 2 (Erbe)
Type: 3 pin Valleylab, pin diameter = 4mm
Coaxial ERBE, pin diameter = 5 mm (inner) and 9 mm (outer)
Function: Monopolar output
Finger switch input (cut and coag)
6-4 Bipolar Standard 3
Type: 2 pin socket, pin diameter = 4mm / pin distance 28.8 mm
Coaxial socket, pin diameter = 4 mm (inner) and 8 mm (outer)
Pinning of connector 13 Docking
Connector
- view of connector side
(bottom view) of ESG
-400
1
2
4
3
1 Hand Cut
2 H
and Coag
3 Active electrode
4 Active electrode
1 Hand Cut
2 Hand Coag
3 Active electrode
4 Cut+Coag+Active electrode (top)
1
2
3
4
7.022.211 / ISSUE 5 30 / 110 Chapter 1: PRODUCT SPECIFICATIONs