ESG-400
1 General
If the electrosurgical unit has visible damage, do not use the electrosurgical unit and contact the legal
manufacturer. If the unit is not functioning properly, use the information in this chapter to identify and correct the
malfunction. If the problem cannot be resolved by the described remedial action, stop using the electrosurgical
unit and contact the legal manufacturer for repair.
DANGER
Never use the electrosurgical unit if an abnormality is suspected.
CAUTION
Repairs must only be carried out by Olympus or a firm authorized by Olympus.
CAUTION
Preventive maintenance (inspection / periodic safety check) must only be
carried out by a qualified person / technician.
7.022.211 / ISSUE 5 46 / 110 Chapter 4: Troubleshooting
To Next Page
