Olympus IPLEX LX Series - Stereo Measurement Screen

117
Chapter 6 Measurement procedures (LX only)
 Stereo measurement screen
Explanation of the stereo measurement screen
List of messages displayed in the instruction message box
Message Description
PUT
M##
Specify measurement point number ## in the left image area.
PUT
R##
Specify reference point number ## in the left image area.
Point
Indicates a specified
measurement point
or reference point.
Object distance
Displays object distance at
cursor position.
Cursor
Specifies a
measurement point or
reference point.
Displaying the measurement method
Instruction message box
Shows instructions, conditions, etc.
Corresponding point
Right image area
Left image area