Olympus IPLEX LX Series - Repacking the Case

132
Chapter 8 Storage and maintenance
8.4 Repacking the case
For 4-mm and 6-mm types
Repack the equipment in the order of: Control unit → Insertion tube → Main unit.
Control unit
Insertion tube
Main unit
Storage process label
Control unit
Insertion tube
Stow the control unit first.
Insertion tube
Universal cable
Shoulder strap
Storage groove
Wind the insertion tube into
the storage groove.
Stow the main unit on top of the insertion
tube.
Next, wind and stow the universal cable.
Last, stow the shoulder strap.