Olympus IPLEX LX Series - 3.10 Attaching and detaching the optical adapter case holder

50
Chapter 3 Preparation and inspection before observation
3.10 Attaching and detaching the optical adapter
case holder
 Attaching the optical adapter case holder
1 Pass the Hook & Loop fastener of the optical adapter case holder
through the ring on the shoulder strap.
2 Fold the Hook & Loop fastener over to fasten it as shown in the
diagram.
 Removing the optical adapter case holder
To remove the optical adapter case holder, pull apart the Hook & Loop fastener
and remove it from the ring.
Hook & Loop fastener
Ring