42
Chapter 3 Preparation and inspection before observation
3.8 Mounting of the control unit on the main unit
The control unit can be attached to the main unit as desired. It can be attached
to the main unit for carrying and left attached to the main unit during observation.
1 Insert the hanger on the side of the control unit straight into the
control unit holder on the side or the back of the main unit. The
hanger may not fit correctly at an angle into the control unit holder,
be sure to put it straight into the control unit holder.
Side attachment: For observationBack attachment: For transport
Handle
Hanger
Control unit holder (side)
Control unit holder (rear)
Lock release button
To Next Page
Loading...
